D-Link DI-524F1 WBR-1310B1 PCB 2.4GHz Wireless Router Internal Motherboard Wireless-G 54Mbps Network for WBR1310 DI524 TEW432BRP
Condition: New - Great Working - (Bulk Pack)
Content: One Circuit Board only Bare PCB as seen in the picture
This is Low Price Solution for your bad malfunctioning wireless DSL Cable network router.
Here is the PCB to replace internally if your router is not working just open your wireless router and just replace intrnal main brain this is whole wireless router even you can make in any housing just you need Antenna, Power Supply Adaptor, and body or shell
it is complete wireless DSL router. Easy to replace mostely just four screws May can fit lot other models also if you can be able to alter the body may need some technical skils to do so.
bassically it was Manufactured for D-Link WBR-1310
After cut and modification of back pannel you can turn your D-Link Wired Ethernet Broadband Router DI-604 ( DI604 ) To Wireless with this Insert (offcourse some technical skills require in case you are handyman)
New TEST TO WORK BUT NEEDS Body, POWER ADAPTER and antenna .
NO BOX NO MANUAL NO DRIVER (Mostely not require but if you need one please go to D-Link website model WBR-1310)
Create a wireless network for your home using the D-Link Wireless G Router (WBR-1310). Connect the Wireless G Router to a broadband modem and wirelessly share your high-speed Internet connection. Enjoy surfing the web, checking e-mail, and chatting with family and friends online.
Compatible and replacement for:
WL RT 2454 NMO B10
Trendnet ==> WLG-2214 (21512WLG22141A1) E169497
Require Input voltage: DC 5V 2.5A 2.1x 5.5 x 10mm round barrel (Adapter not included you need power supply that will give you out put 5vdc 2.5a)
Signal: Up to 54Mbps Wireless Signal
Standards: IEEE 802.11G - IEEE 802.11B
Protection: Advanced Firewall Protection
Ports: 1x WAN Port & 4x 10/100 Mbps LAN RJ-45 Connectors
Security: 64/128bit WEP & More
Circuit Board's Dimension: 13.5 x 10.1 x 1.4 cm WxDxH approx. Protruding Parts are not included
Weight: 94 grams approx.
Some known To use with : DLink wireless Routers
Trendnet TEW-432BRP Plotech ( Please note for Trendnet original one is 7.5Vdc 1A if you change with this PCB then you need to use adapte 5V 2.5A)
Product MPN: WBR-1310
Router Functionalities Firewall, Wireless Access Point
Built-In 4-port Built-In Switch
LAN Interfaces 10/100 Base-T
WAN Interfaces 1 x 10/100M
Standards and LAN Standards IEEE 802.11b 2.4 Ghz 11 Mbs Wi-Fi, IEEE 802.11g, IEEE 802.3 CSMA/CD or Ethernet, IEEE 802.3u 100 Mbps (Fast Ethernet)
Remote Management Protocol HTTP
Firewall / VPN Features MAC Address Filtering, NAT, Stateful Packet Inspection (SPI), URL Filtering
WLAN Standards IEEE 802.11g/b
802.11b Data Rates 11 Mbps, 5.5 Mbps, 2 Mbps, 1 Mbps
802.11g Data Rates 54 Mbps, 48 Mbps, 36 Mbps, 24 Mbps, 28 Mbps, 12 Mbps, 9 Mbps, 6 Mbps, 5.5 Mbps, 2 Mbps, 1 Mbps
Modulation 16QAM, 64QAM, BPSK, CCK, DBPSK, DQPSK, DSSS, OFDM, QPSK
Security WEP, WPA
WEP Encryption Length 128 bit, 40 bit (=64 bit)
Antenna Type Detachable Antenna x 1
LED Indicators Power, Status, WAN, WLAN (Wireless LAN)
To put in Box require approx. Dimensions: Width 4.3 x Depth 5.6 x Height 1.2 inches
■ Also Compatible With Some other brands and models.
(Item can be similar if exact match not available)
Please Research yourself with compatibility of your apparatus.
Some times Part no. Model no. or serial no. may or may not same but product will be compatible.
Please check product documentation for compatibility prior to purchase.
Information's are here for your reference only and accuracy can not be guaranteed.
Copyright © 2010 - 2016 All rights reserved
This product was added to our catalog on Sunday 01 August, 2010.